Shibori lampshade sable garance & cochenille 10
For a focus of light and colour.
Teinture mélange garance & cochenille – couleur rouge
The Shibori Cylindrical Shade 10 X 20cm is the smallest cylindrical shade of the Shibori range, it brings a touch of light and colour on a sober stand or can be used in clusters of several shades in suspension.
It is specially designed for vertical single-shade wall lamps in the collection or in combination with horizontal multi-shade wall lamps.
Lampshade in linen & silk,
Dimensions: diameter 10 cm height: 20 cm
E14 bulb max 5w recommended (not supplied). Not suitable for outdoor use. Stand not supplied. These colours remain alive, more or less solid depending on the plant, and will change over time. They must be protected from direct sunlight and humidity to avoid damage. The Atelier Textile Agnès Calas cannot be held responsible for the evolution of these natural colours due to improper use (exposure to sunlight or humidity in particular...) which would accentuate their degradation over time.
It is recommended to keep a minimum distance of 5 cm between the lampshade and the bulb to avoid damaging it. However, since the advent of LED bulbs, which emit very little heat, this precaution is less necessary.
The ideal diameter of a suspension in a room : (length of the room in m + width of the room in m(length of the room in m + width of the room in m
The ideal height of a suspension : It is preferable to leave a minimum of 2.15 m between the lower part of the suspension and the ground.
The ideal diameter of a suspension above a table : diameter of the shade = at least 30 cm less than the width of the table.
Above a dining table : Allow 80 to 120 cm between the table top and the bottom of the suspension.
The ideal diameter The ideal diameter should be 1.5 to 2 times the width of the lamp foot or base.
The height of the lampshade should never exceed that of the foot.
The lampshade must not hide the base of the lamponly the socket.
For a floor lamp prefer a large lampshade